Table of Contents
Advertisement
USB PC or Macintosh Keyboard
Scan one of the following codes to program the scanner for USB PC Keyboard or
USB Macintosh Keyboard. Scanning these codes also adds a CR suffix.
USB HID
Scan the following code to program the scanner for USB HID Barcode scanners.
USB Serial
If you are using a Microsoft® Windows® PC, you will need to download the latest
driver from the Honeywell website
Software and Downloads. The driver will use the next available COM Port number.
Apple® Macintosh computers recognize the scanner as a USB CDC class device
and automatically use a class driver.
After the driver is downloaded, scan the following code to program the scanner to
emulate a regular RS232-based COM Port.
No extra configuration (e.g., baud rate) is necessary.
Note: If you scan the USB Serial barcode either with an older Honeywell serial driver, or no
driver installed, you may no longer be able to scan barcodes. If this happens, either
uninstall the older driver versions and install the latest driver, or delete the specific
device entry in Device Manager.
18
USB Japanese Keyboard (PC)
USB HID Barcode Scanner
(sps.honeywell.com)
USB Serial
USB Keyboard (Mac)
and then select Support >
Xenon XP User Guide
Advertisement
Table of Contents
