Honeywell Xenon XP 195 Series User Manual page 177

When Check Digit is set to Validate and Transmit, the scanner only reads
Interleaved 2 of 5 barcodes printed with a check digit, and will transmit this digit at
the end of the scanned data. Default = No Check Digit.
Interleaved 2 of 5 Message Length
Scan the barcodes below to change the message length. Refer to
Description
lengths = 2-80. Minimum Default = 6, Maximum Default = 80.
Minimum Message Length
FEBRABAN Decode
Scan the barcodes below to turn FEBRABAN Boleto decoding on or off. Default =
Off.
Xenon XP User Guide
* No Check Digit
Validate and Transmit
(page 152) for additional information. Minimum and Maximum
FEBRABAN Decode On
Validate, but Don't Transmit
Message Length
Maximum Message Length
*FEBRABAN Decode Off
159