Honeywell Xenon XP 195 Series User Manual page 186

the higher the redundancy count, the longer it will take to decode the barcode. To
adjust the redundancy, scan the Code 128 Redundancy barcode below, then scan a
redundancy count between 0 and 10 on the
page 311. Then scan the Save barcode. Default = 0.
Code 128 Message Length
Scan the barcodes below to change the message length. Refer to
Description
lengths = 0-80. Minimum Default = 0, Maximum Default = 80.
Minimum Message Length
Code 128 Append
This function allows the scanner to append the data from several Code 128
barcodes together before transmitting them to the host computer. When the
scanner encounters a Code 128 barcode with the append trigger character(s), it
buffers Code 128 barcodes until it reads a Code 128 barcode that does not have
the append trigger. The data is then transmitted in the order in which the barcodes
were read (FIFO). Default = Off.
Code 128 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see
168
(page 152) for additional information. Minimum and Maximum
On
Programming Chart,
Code 128 Redundancy
beginning on
Message Length
Maximum Message Length
* Off
ISO 2022/ISO 646
Xenon XP User Guide