I Preset Position Control; I Home Position Control; I Camera Function Control - Panasonic WV-CU650 Operating Instructions Manual

I Preset Position Control

Preset position is the function to register camera monitoring
positions (preset positions) associated with position num-
bers. By entering the position numbers, you can move cam-
eras to the preset positions.
Note: To activate this function, you need to register the pre-
set positions of combination camera.
1. Select a system unit, monitor, and desired camera.
(Refer to p. 41 System Unit Selection, p. 42 Monitor
Selection, and p. 42 Camera Selection.)
2. Enter a preset position number by pressing the numeric
buttons. The entered number will appear on the LCD.
Mon02 Cam001
F1 F2
3. Press the PRESET/PGM PRESET button.
The camera will move to the registered preset position,
and the preset position image will be displayed on an
active monitor.
Mon02 Cam001
F1 F2
To register preset positions
1. Move the camera to a desired position by moving the
3D joystick.
2. Enter a preset position number you wish to register by
pressing the numeric buttons.
The entered number will appear on the LCD.
Mon01 Cam001
F1 F2
3. Press the PRESET/PGM PRESET button while holding
down the SHIFT button.
The preset position will be registered, and "Memory"
will appear on the LCD.
Mon01 Cam001
Memory
Note: If the registration have failed, "Invalid" will appear
on the LCD. (Example: When the selected camera
does not support preset position control)
Mon01 Cam001
Invalid
____3
F3 F4
Pre003
F3 F4
___12
F3 F4
Pre012
Pre012

I Home Position Control

Home position is the default preset position. You can move
the camera to the home position only by pressing the PRE-
SET/PGM PRESET button.
Note: To activate this function, you need to register the
home position of combination camera. (Refer to the
operating instructions of combination camera.)
1. Select a system unit, monitor, and desired camera.
(Refer to p. 41 System Unit Selection, p. 42 Monitor
Selection, and p. 42 Camera Selection.)
2. Press the PRESET/PGM PRESET button. The camera
will move to the registered home position, and the home
position image will be displayed on an active monitor.
Note: You can also move the camera to the home posi-
tion by pressing the button 0, and then the PRE-
SET/PGM PRESET button.

I Camera Function Control

You can recall the camera functions of combination cam-
eras by entering the function number from this system con-
troller. Refer to the operating instructions of combination
camera for the association of camera numbers and func-
tions.
1. Select a desired combination camera. (Refer to p. 42
Camera Selection.)
2. Enter a camera function number by pressing the
numeric buttons. The entered number will appear on
the LCD.
Mon01 Cam001
F1 F2
3. Press the CAM FUNC/SYS FUNC button.
The associated camera function will be activated.
Note: If you assign camera functions to the joystick function
buttons (A, B, and top buttons), you can recall the cam-
era functions by pressing these buttons. Refer to p. 57
MENU FUNCTION DESCRIPTIONS for details.
____3
F3 F4
51