Panasonic WV-CU650 Operating Instructions Manual page 75

Function Table 2 Table 3
01 MENU D D
02 F1 – F4 E E
03 F5 – F8 E E
04 A B E E
05 TOP SW E E
06 JOYSTICK E E
07 FOCUS NEAR/FAR E E
08 IRIS OPEN/CLOSE E D
09 CAM/SET E E
10 MON/ESC E E
11 UNIT E E
12 RECORDER E E
13 CAM POSI E E
14 PRESET E E
15 PGM PRESET D D
16 HISTORY E E
17 –/+ E E
18 JOG DIAL E E
19 SHUTTLE RING E E
20 SHUTTLE HOLD E E
21 PLAY/PAUSE E E
22 STOP E E
23 REC E D
24 ALM SUSPEND E D
25 ALM RESET E E
26 OSD E E
27 ALM RECALL E E
28 SEQ PAUSE E E
29 SEQUENCE E E
30 MULTI SCREEN E E
31 EL-ZOOM E E
32 AUX1 ON/OFF E E
33 AUX2 ON/OFF E E
34 DEF ON/OFF E E
35 WIPER ON E E
36 SYS FUNC D D
37 CAM FUNC D D
38 GO TO LAST E E
39 MARK E E
40 SEARCH E E
41 T&D SEARCH E E
E=Enabled, D=Disabled
5. Rotate the shuttle ring clockwise or move the 3D joy-
stick to the right. The cursor will jump to the next item.
Function Table2
08 IRIS OPEN/CLOSE=E
Note: To return to Step 4, rotate the shuttle ring coun-
terclockwise or move the 3D joystick to the left.
6. Select E or D by performing either of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Function Table2
08 IRIS OPEN/CLOSE=D
Note: To change the settings of other functions, repeat
Step 4 to 6.
7. Press the ENTER or CAM (SET) button.
"Set OK?" will appear on the LCD.
8. Press the ENTER or CAM (SET) button again.
G Camera Level Setting
You can change the camera levels for each operator. The
camera levels range between Table No. 1 (highest level)
and 3 (Lowest level).
Notes:
• Table No. 1 is fixed to E (Enabled) for all cameras.
• As the factory default, Table No. 2 and 3 are set to E for
1. Display "Camera Level" sub menu. (Refer to Step 1 to 4
2. Select a desired table (= camera level) by performing
405
3. Press the CAM (SET) button.
405
4. Select a desired camera channel by performing one of
Function Table2
Set OK?
Note: To cancel the setting, press the EXIT or MON
(ESC) button. The LCD display will return to Step 6.
Function Table2
Memory
The function levels will be set for the selected table.
"Memory" will appear on the LCD for a few seconds,
and the LCD display will return to Step 1.
all cameras.
of p. 61 To Recall Menu Functions.)
Camera Level
Table No.
one of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
• Enter the function number with the numeric buttons.
Camera Level
Table No.
The setting menu for the selected table will appear on
the LCD.
Camera Table3
Cam001
the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
• Enter the camera number with the numeric buttons.
405
405
406
=1
406
=3
406
=E
75