Panasonic WV-CU650 Operating Instructions Manual page 73

Operator Setup
Operator02
Note: When registering a new operator, select an oper-
ator number beside which "No Assign" is displayed.
Operator Setup
Operator07 No Assign
3. Press the ENTER or CAM (SET) button.
"User ID" setting menu will appear on the LCD.
Operator07
User ID=
4. Enter a user ID by pressing the numeric buttons.
"1" to "99999" are available for the user ID number.
Operator07
User ID=
Note: If you have entered a wrong user ID, press the
CLEAR button.
5. Press the ENTER or CAM (SET) button.
The password entry form will appear on the LCD.
Operator07
Password=
6. Enter a password by pressing the numeric buttons.
"1" to "99999" are available for the password.
Operator07
Password=
Note: If you have entered a wrong password, press the
CLEAR button.
7. Press the ENTER or CAM (SET) button.
"Function Level" setting menu will appear on the LCD.
Operator07
Function Level
8. Set the function level by performing either of the follow-
ing.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
404
404
404
1
404
777
404
12345
404
333
404
= 1
Operator07
Function Level
Notes:
• Refer to p. 74 Function Level Setting for details on
function level.
• You cannot change the function level of Operator 1.
If you try to change, "Level 1 Fixed" will appear on
the LCD.
Operator01
Level1 Fixed
9. Press the ENTER or CAM (SET) button.
"Camera Level" setting menu will appear on the LCD.
Operator07
Camera Level
10. Set the camera level by performing either of the follow-
ing.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Operator07
Camera Level
Notes:
• Refer to p. 75 Camera Level Setting for details on
camera level.
• You cannot change the camera level of Operator 1.
If you try to change, "Level 1 Fixed" will appear on
the LCD.
Operator01
Level1 Fixed
11. Press the ENTER or CAM (SET) button.
"Set OK?" will appear on the LCD.
Operator07
Set OK?
12. Press the ENTER or CAM (SET) button again.
The new operator and the settings will be registered.
"Memory" will appear on the LCD for a few seconds,
and the LCD display will return to Step 1.
Operator07
Memory
404
= 2
404
404
= 1
404
= 2
404
404
404
73