Advertisement
IR Remote Control
- Remote Control
You can operate the major functions of your Palmcorder from up to approximately 16 feet
(5 m) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder and
press the desired buttons (sensor is located under the lens).
To operate Camera functions:
e Rec/Pause
¢ Tele (Zoom)
To operate VCR functions:
. Wide (Zoom)
¢ Date/Time
Set the POWER Switch to VCR.
. Reset
e Photo Shot
e Display On TV
e Counter/Time Code
e Audio Dubbing
e Record
e Menu
e Play
e FF/Search
e REW/Search
e Pause/Select
e Stop/Set
¢ Slow/Frame Advance (Forward)
e Slow/Frame Advance (Backward)
* Index Search (Forward)
¢ Index Search (Backward)
. Speaker Volume
Remote Controlling Two Palmcorders
You can control any two PV-DV900's with
1 Display the menu and select REMOTE
one IR Remote control. In order for the
VCR 2 on one Palmcorder. Leave the
remote to distinguish between the two
other Palmcorder set to VCR1.
units, it is necessary to set one of the
Palmcorders to VCR 2. On the remote,
press VCR 1 or VCR 2 to control the
desired Palmcorder.
BEEP
OFF
SON
{4 DISPLAY SETTING
{@f)
END : PUSH MENU KEY
2 Set the Remote Control to VCR 1 or
VCR 2 to correspond with the
Palmcorder you wish to control.
For VCR 1:
(See illustration at left.)
Press these
Note:
e After replacing the Remote Control
Battery, the remote will default to VCR 1.
3
For VCR 2:
Press these
buttons at the
same time.
Advertisement
