I To Change The Administrator Password - Panasonic WV-CU650 Operating Instructions Manual

I To Change the Administrator
Password
You can change the administrator password. The factory
default is "650".
G Operation
1. Turn off the power.
2. Turn on the power while holding down the button 1 and
MON (ESC) button.
"Admin Password" entry form will appear to perform the
setting.
Admin Password Setup
Admin Password _____
3. Enter the current administrator password.
The password entered will be displayed as "∗" marks.
Admin Password Setup
Admin Password ∗ ∗ ∗ ∗ ∗
Notes:
• The factory default is "650".
• To delete a character, press the CLEAR button.
4. Press the CAM (SET) button.
If the password entered is correct, "Old Password"
entry form will appear.
Admin Password Setup
Old Password
5. Enter the current administrator password again.
The password entered will be displayed as "∗" marks.
Admin Password Setup
Old Password
Note: To delete a character, press the CLEAR button.
6. Press the CAM (SET) button.
If the password entered is correct, "New Password"
entry form will appear.
Admin Password Setup
New Password
Note: If the old password entered is wrong, the LCD
display will return to Step 4. Enter the old password
again.
7. Enter a new administrator password.
8. Press the CAM (SET) button.
9. Enter the new administrator password again.
10. Press the CAM (SET) button.
_____
11. Turn off the power.
∗ ∗ ∗ ∗ ∗
_____
The password entered will be displayed as "∗" marks.
"1" to "99999" are available for the password.
Admin Password Setup
New Password
"New Password" entry form will appear again.
Admin Password Setup
New Password
The password entered will be displayed as "∗" marks.
Admin Password Setup
New Password
The new password has been memorized in the system,
and "Memory" will appear on the LCD.
Admin Password Setup
Memory
Then, "End" will appear on the LCD.
Admin Password Setup
End
Note: If the new password entered is wrong, the LCD
display will return to Step 4. Enter the old password
again.
∗ ∗ ∗ ∗ ∗
_____
∗ ∗ ∗ ∗ ∗
31