I To Recall Menu Functions - Panasonic WV-CU650 Operating Instructions Manual

Camera +1
J/S MENU
Camera +1
The image of camera with the higher channel number will
be displayed.
Camera –1
J/S MENU
Camera -1
The image of camera with the lower channel number will be
displayed.
HD300 A-B Repeat (WJ-HD300 Series Only)
J/S MENU
HD300 A—B Repeat
• You will set the start and end points of A – B repeat
playback of WJ-HD300 Series.
• You will cancel A – B repeat playback of WJ-HD300
Series.
HD500 Copy (WJ-HD500 Series Only)
J/S MENU
HD500 Copy
Recorded images will be copied from the built-in hard disk
of recorder to external recording devices.
HD200 Alarm Search (WJ-HD200 Series Only)
J/S MENU
HD200 Alm Search
The alarm search function of recorder will be activated.
Multiscreen Display
J/S MENU
Multi 4-Seg
J/S MENU
Multi 7-Seg
510
511
The screen of monitor connected to the selected system
unit will be divided in multiscreen segments.
Note: Available multiscreen segment patterns differ
depending on system units. Refer to the operating
instructions of system units.
512

I To Recall Menu Functions

You can recall menu functions as follows.
1. Select a system unit for which you wish to recall a func-
tion. (Refer to p. 41 System Unit Selection, p. 41
Recorder Selection, p. 42 Monitor Selection, or p. 42
Camera Selection.)
513
Note: You can skip Step 2 and 3 if you know what func-
2. Press the MENU button.
514
"Camera Setup" main menu will appear on the LCD.
3. Select a desired function.
Select a category (q) by rotating the shuttle ring. Then,
select a function number (w) by rotating the JogDial.
515
516
Note: Refer to pp. 58 to 61 for selectable functions.
J/S MENU
Multi 9-Seg
J/S MENU
Multi 10-Seg
J/S MENU
Multi 13-Seg
J/S MENU
Multi 16-Seg
Mon01 Cam016
F1 F2 F3
tion to recall. In this case, enter a function number,
and press the MENU button. Then, go to Step 4.
LCD MENU
Camera Setup
LCD MENU
System Setup
517
518
519
520
HD316
F4
CAM 101
SYS 301
61