51
Removing and installing ignition
51 25
switch/steering lock
•
Remove fork bridge.
•
With a 4 mm (0.1575 in) dia. drill bit, drill approx.
5 mm (0.1969 in) into non-removable screw (1).
•
Use an 8 mm (0.3150 in) dia. drill bit to drill away
the screw head.
•
Pull out the ignition switch/steering lock.
•
Unscrew and remove remainder of screw with
stud bolt extractor.
•
Install steering lock with non-removable socket
wrench insert, BMW No. 51 0 531.
X
Tightening torque:
Non-removable screws
(micro-encapsulated).................................... 20 Nm
Removing and installing ignition/
61 13
light switch
•
Remove screw (1).
•
Remove the ignition/light switch.
•
Installation is the reverse of the removal proce-
dure.
Removing and installing lock barrel
2
R21510030
•
Key in ON position/press in keeper (2) with a stiff
wire or similar.
•
Pull out lock barrel with key.
•
Lubricate the new lock barrel with
Shell Retinax A.
•
Insert the lock barrel with the key in the ON posi-
tion.
•
Press lock barrel down until keeper engages.
Drilling out lock barrel
•
Use a 4-5 mm (0.1575-0.1969 in) dia. drill bit to
drill the full length of the lock barrel.
•
Repeat with drill bits of successively larger diam-
eter until the lock barrel can be removed.
1
R21510010
R21510020
51.3