Supply Air Electronics; Check All Existing Tray Trolleys - Henny Penny FlexFusion FPG-221 Maintenance Instruction

Performing maintenance
Check the air supply to the cooking chamber
Test criteria
• Supply air opening is free (air flow is not restricted or ob-
structed).
Action
Clean the supply air opening.

8.2.3 Supply air electronics

Check the supply air to the electronics
Test criteria
• Supply air opening is free (air flow is not restricted or ob-
structed).
Action
Clean the supply air opening.

8.3 Check all existing tray trolleys

Check external damage to the tray trolley with drive-in system
Test criteria
• Tray trolley appears OK externally.
– Handle bar is present and the function is given.
– Safety information is legible and without contami-
nation.
• Ball bearings are externally in order.
– Ball bearings are easy to move.
• Rollers are externally in order.
– Rollers are firmly screwed on.
– Rollers are easy to move.
If No
Clean the tray trolley and make the safety information legible.
If no
Change ball bearing.
If No
Change the roller.
Check alignment of the tray trolley with retraction system
Test criteria
• The tray trolley stands horizontally and securely on its
rollers.
– Tray trolley is aligned.
– Floor unevenness of up to 10 mm is compensated.
– Safe entry and exit of the tray trolley is guaran-
teed.
Align with No
horde car.
24 Maintenance instructions
Remarks / values
Remarks / values
Remarks / values
Remarks / values
Yes No
Yes No
Yes No
Yes No