Align Combi Steamer; Check Housing - Henny Penny FlexFusion FPG-221 Maintenance Instruction

8.3.1 Align combi steamer

8.4 Check housing

Check hand shower
Test criteria
• Hand shower is tight.
• Hand shower works perfectly.
• undamaged.
If No
Check hose reel.
If No
Change hand shower.
e
d
c
Image: Aligning tray trolley with insertion system
a Tray trolley
b Distance
c Guide rail
1. Level the unit by screwing the equipment legs in or out.
2. Open the cooking chamber door.
3. Place the tray trolley against the guide rails.
4. Screw the unit legs in or out until the support rollers 1 mm (0,04 in) -
5 mm (0,2 in) are above the support rails.
5. Retract the tray trolley.
6. Level the guide rails.
7. Move tray trolley into the unit until it stops and check the alignment.
The support rollers of the inserted tray trolley no longer have
floor contact.
8. Remove the push handle.
9. Close the cooking zone door.
Maintenance instructions
Performing maintenance
b
a
d Unit leg
e Support roller
f Handle bar
Remarks / values
f
Yes No
25