7.2 Opening and closing the control panel
7.2.1 Opening the control panel
7.2.2 Closing the control panel
• Replace damaged seals.
1. Insert top edge of side wall.
2. Carefully push the bottom of the side wall inward.
3. Secure the bottom of the side panel with screws.
4. Check that the side wall is in contact with the unit on all sides.
Image: Opening the control panel
a Lock (cam)
c Hex key
1. Insert hex key into screw and turn clockwise.
The operating panel is now unlocked.
The operating panel pops up automatically.
2. Withdraw the hex key.
1. Press and hold operating panel on the left.
Repeat as many times as necessary.
The operating panel snaps in audibly.
The operating panel is secured against unauthorized opening.
Maintenance instructions
Opening and closing the housing
a
c
b Operating panel
b
21