Henny Penny FlexFusion FPG-221 Maintenance Instruction page 8

Notes on safety
Improper maintenance Risk of physical damage and personal injury from improper
Concluding activities Risk of damage to property and personal injury from improper
8
• Ensure that a maximum CO content of < 0.1 vol. % or < 1000 ppm
is achieved in undiluted exhaust gas.
Risk of fire from combustion gases and hot surfaces
• Install the unit such that there is no contact with combustible
surfaces.
• Maintain an adequate distance from grease filters on ventilation
systems.
maintenance
• Service the unit only as specified in these maintenance
instructions.
• Use only original spare parts.
connections
• Reactivate all safety devices and check that they function
properly.
Maintenance instructions