Garmin G2000 Pilot's Manual page 291

Creating a user-defined hold at the aircraft present position:
1) From Home, touch Flight Plan > Flight Plan Options
2) Touch the Hold at P.POS Button. The Hold at Waypoint Screen is displayed.
3) Touch the Turn Direction Button, and touch the Right Button or the Left Button to select the turn direction.
4) Touch the Course Direction Button, and touch the Inbound Button or the Outbound Button to select the
course direction.
5) Touch the Hold Entry Course Button to display the keypad. Use the keypad and the Enter Button to select the
entry angle.
6) Touch the Leg Length Mode Button, and touch the Distance Button or the Time Button to select the length
mode.
7) Touch the Leg Time Button or the Leg Distance Button to display the keypad. Use the keypad and the Enter
Button to select the length of the leg.
8) Touch the Expect Further Clearance Button to display the keypad. Use the keypad and the Enter Button to
select the time for a reminder.
9) Touch the Create Button to create an Offroute Direct-to hold waypoint.
Course Direction Button
(Inbound or Outbound)
Turn Direction Button
Hold at Present Position Button
Hold Location Information
Cancel Hold Button
190-01263-01 Rev. A
This manual downloaded from http://www.manualowl.com
Figure 5-128 Creating a User Defined Holding Pattern at the Aircraft Present Position
Garmin G2000 Pilot's Guide for the Cessna T240
Flight ManageMent
Hold at P.POS Button
Leg Length Mode Button
(Time or Distance)
Leg Time or Leg Distance Button
Hold Entry Course Button
Expect Further Clearance Button
Show on Map Button
277