Garmin G2000 Pilot's Manual page 63

The MFD Navigation Status Bar can display up to eight navigation data bar fields. By default, the
Navigation Status Bar displays Ground Speed (GS), Desired Track (DTK), Track (TRK), Estimated Time
Enroute (ETE), Bearing (BRG), Distance (DIS), Minimum Safe Altitude (MSA), and Estimated Time of
Arrival (ETA). The system assigns each data bar field a corresponding number, 1 though 8, as displayed
from left-to-right in the MFD Navigation Status Bar.
Change the information shown in an MFD Data Bar field:
1) From the Home, touch Utilities > Setup > Avionics Settings.
2) If necessary, touch the MFD Fields Tab.
3) Scroll as needed and touch the MFD Data Bar Field Number to be changed (1 through 8); current selection for
each data bar field displayed in light blue.
4) Scroll as needed and touch the button corresponding to the desired data to be shown in the selected MFD Data
Bar Field.
The following data may be selected for display in each of the eight fields of the Navigation Status Bar.
• Bearing (BRG)
• Distance (DIS)
• Desired Track (DTK)
• Endurance (END)
• Enroute Safe Altitude (ESA)
• Estimated Time of Arrival (ETA)
• Estimated Time Enroute (ETE)
• Fuel On Board (FOB)
• Fuel Over Destination (FOD)
AUDIO SETTINGS
The Audio Tab allows configuration the audio alert voice gender, as well as the 3D audio feature for the
pilot and copilot. Refer to the Audio & CNS Section for more information about 3D audio.
190-01263-01 Rev. A
This manual downloaded from http://www.manualowl.com
• Audio Alert Voice
• Pilot 3D Audio
• Pilot L-R Swap
• Copilot 3D Audio
• Copilot L-R Swap
Garmin G2000 Pilot's Guide for the Cessna T240
SyStem Overview
• Ground Speed (GS)
• Minimum Safe Altitude (MSA)
• True Airspeed (TAS)
• Track Angle Error (TKE)
• Track (TRK)
• Vertical Speed Required (VSR)
• Cross-Track Error (XTK)
49