Garmin G2000 Pilot's Manual page 33

BUTTON TyPES
Annunciator Buttons operate in an on/off state. An 'on' or enabled button displays a green annunciator; an
'off' or disabled button displays a gray annunciator. Touch the annunciator button to change its state.
Datafield Buttons can be modified based on information the pilot can enter or change, and often contain
light blue text. Touching a datafield button will either display a pop-up window from which a selection
can be made, or display a keypad to supply the data. See the Data Entry discussion in this section for more
information.
If a system failure causes a button' s function to be unavailable, a yellow 'X' appears over the affected button.
These buttons will not respond when touched.
190-01263-01 Rev. A
This manual downloaded from http://www.manualowl.com
On or Enabled
Figure 1-19 Touchscreen Controller Annunciator Buttons
Figure 1-20 Touchscreen Controller Datafield Buttons
Button Functions Not Available
Due to LRU Failure
Figure 1-21 Failed Buttons on Touchscreen Controller
Garmin G2000 Pilot's Guide for the Cessna T240
SyStem Overview
Off or Disabled
19