Garmin G2000 Pilot's Manual page 319

FUEL STATISTICS
The fuel statistics are calculated based on the selected starting and ending waypoints and the trip planning
inputs. Some of the calculated trip statistics are dashed when the selected leg of the active flight plan has
already been flown.
• Fuel efficiency (EFFICIENCY) - This value is calculated by dividing the current ground speed by the
current fuel flow.
• Time of fuel endurance (TOTAL ENDUR) - This time is shown as hours:minutes. This value is obtained
by dividing the amount of fuel on board by the current fuel flow.
• Fuel on board upon reaching end of selected leg (REM FUEL) - This value is calculated by taking the
amount of fuel onboard and subtracting the fuel required to reach the end of the selected leg.
• Fuel endurance remaining at end of selected leg (REM ENDUR) - This value is calculated by taking the time
of fuel endurance and subtracting the estimated time enroute to the end of the selected leg.
• Fuel required for trip (FUEL REQ) - This value is calculated by multiplying the time to go by the fuel
flow.
• Total range at entered fuel flow (TOTAL RANGE) - This value is calculated by multiplying the time of fuel
endurance by the ground speed.
OTHER STATISTICS
These statistics are calculated based on the system sensor inputs or the manual trip planning inputs.
• Density altitude (DENSITY ALT)
• True airspeed (TRUE AIRSPEED)
Selecting the Stored Flight Plan - Cumulative trip route mode:
1) From Home, touch Utilities > Trip Planning
2) Touch the Trip Route Button to display the Input Selection Window.
3) Touch the Select from Flight Plan Button to display the Select Flight Plan Screen.
4) Scroll the list, if necessary, and touch a stored flight plan button to display the Select Flight Plan Leg Screen.
5) Touch the Cumulative Flight Plan Button to select the mode and return to the Trip Planning Screen.
Selecting the Stored Flight Plan - Leg trip route mode:
1) From Home, touch Utilities > Trip Planning
2) Touch the Trip Route Button to display the Input Selection Window.
3) Touch the Select from Flight Plan Button to display the Select Flight Plan Screen.
4) Scroll the list, if necessary, and touch a stored flight plan button to display the Select Flight Plan Leg Screen.
5) Scroll the list, if necessary, and touch a flight plan leg selection button to select the mode and return to the Trip
Planning Screen.
190-01263-01 Rev. A
This manual downloaded from http://www.manualowl.com
Garmin G2000 Pilot's Guide for the Cessna T240
Flight ManageMent
305