Garmin G2000 Pilot's Manual page 249

Flight ManageMent
Selecting a waypoint as the direct-to destination by identifier:
1) From Home, touch Direct To.
2) Touch the waypoint selection button to display the keypad.
3) Use the keypad to select the waypoint identifier.
4) Touch the Enter Button to accept the identifier, and and return to the Direct To Screen.
5) Touch the Activate ¯ Button to activate the direct-to.
Selecting a waypoint as the direct-to destination by identifier using the GDU Controller:
1) On the GDU Controller, press the ¯ Button to display the Direct To Window.
2) Turn the large PFD Knob to move the cursor to the identifier field, if necessary.
3) Turn the small PFD Knob one click to activate the editing cursor (flashing).
4) Turn the large and small PFD knobs to select the identifier (large knob moves the cursor; small knob selects the
character)
5) Press the ENT Key or the small PFD Knob to accept the selection and move the cursor to the ACTIVATE? field.
6) Press the ENT Key or the small PFD Knob to activate the direct-to.
Figure 5-74 Direct To by Identifier using the GDU Controller
Finding and selecting a waypoint as the direct-to destination by facility name or city name:
1) From Home, touch Direct To.
2) Touch the waypoint selection button to display the keypad.
3) Touch the Find button to display the Find Waypoint Screen.
4) Touch the Search Tab to display the Search By Button.
5) If necessary, touch the Search By Button to choose Search by City or Search by Facility.
6) Touch the Facility Name Button or the City Name Button to display the keypad.
7) Use the keypad to select the name.
8) Touch the Enter Button to accept the entry and display the search results.
190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 235
This manual downloaded from http://www.manualowl.com