Flight Plan Creation - Garmin G2000 Pilot's Manual

Flight ManageMent
The following could cause the airway update to fail:
• Airway identifier, entry waypoint or exit waypoint not found in the new database.
• Airway entry/exit waypoint is not an acceptable waypoint for the airway – either the waypoint is no longer on
the airway, or there is a new directional restriction that prevents it being used.
• Loading the new airway sequence would exceed the capacity of the flight plan.

Flight plan creation

There are four places to create, modify, or view a flight plan:
• Active Flight Plan Screen on the Touchscreen Controller (create/modify the active flight plan)
• Flight Plan Catalog Screen on the Touchscreen Controller (create/modify a stored flight plan)
• Flight Plan Window on the PFD (create/modify the active flight plan)
• Active Flight Plan Inset Window (view the active flight plan)
Direct To (¯) Button
PROC Button
VNAV Button
Flight Plan Options Button
Number of Flight Plans Stored
Stored Flight Plan Options Button
Departure Airport Identifier/Symbol
Destination Airport Identifier/Symbol
244
This manual downloaded from http://www.manualowl.com
Figure 5-83 Active Flight Plan Screen
Figure 5-84 Flight Plan Catalog Screen
Garmin G2000 Pilot's Guide for the Cessna T240
Flight Plan Name
Departure Identifier Button
Waypoint Selection Button
Active Flight Plan Leg
Bearing/Distance to Waypoint
Enroute Button
VNAV Altitude Button
Number of Available Storage Spots
Cumulative Flight Plan Distance
Flight Plan Enroute Safe Altitude
Create New Catalog Flight Plan
Button
190-01263-01 Rev. A