Garmin G2000 Pilot's Manual page 250

Flight ManageMent
9) Touch a waypoint selection button to choose the waypoint as the direct-to destination, and return to the Direct
To Screen.
10) Touch the Activate ¯ Button to activate the direct-to.
Search By
Button
- Name
- Facility
Search Tab
Selecting a waypoint as the direct-to destination by facility name or city name using the GDU
Controller:
1) On the GDU Controller, press the ¯ Button to display the Direct To Window.
2) Turn the large PFD Knob to move the cursor to the facility name or city name field.
3) Turn the small PFD Knob one click to activate the editing cursor (flashing).
4) Turn the large and small PFD knobs to select the name (large knob moves the cursor; small knob selects the
character)
5) Press the ENT Key or the small PFD Knob to accept the selection and move the cursor to the ACTIVATE? field.
6) Press the ENT Key or the small PFD Knob to activate the direct-to.
236
This manual downloaded from http://www.manualowl.com
Figure 5-75 Find Waypoint Screen - Search by City Name
Figure 5-76 Direct To by City Name using the GDU Controller
Garmin G2000 Pilot's Guide for the Cessna T240
City Name
Button
Waypoint
Selection
Button
190-01263-01 Rev. A