Garmin G2000 Pilot's Manual page 304

Flight ManageMent
Viewing available procedures at an airport:
1) From Home, touch Waypoint Info > Airport
2) If necessary, touch the Airport Button to display the keypad and use it to select the airport.
3) Touch the Proc Tab to display the Airport Procedures Screen.
4) Scroll the list if necessary and touch a procedure selection button. The procedure selection screen is displayed
for the selected procedure.
5) Touch the Preview Button, then the Show on Map Button to show the preview of the procedure.
6) Touch the Back Button to return to the Airport Procedures Screen to view another procedure.
7) Repeat steps 4 - 6 as necessary.
REMOVING A DEPARTURE FROM THE ACTIVE FLIGHT PLAN
When plans change while flying IFR, departures can be easily removed from the Active Flight Plan.
Removing a departure from the active flight plan using the Touchscreen Controller:
1) From Home, touch PROC
2) Touch the Departure Button to display the Departure Selection Screen.
3) Touch the Remove Button. A 'Remove departure?' window is displayed.
4) Touch the yes Button. The departure is removed from the active flight plan. To cancel the request, touch the
No Button.
Removing a departure from the active flight plan using the GDU Controller:
1) Press the PROC Key to display the Procedures Window on the PFD.
2) Press the PFD Knob, and turn to highlight the departure header in the active flight plan.
3) Press the CLR Key. A confirmation window is displayed listing the departure procedure.
4) With 'OK' highlighted, press the ENT Key or the small PFD Knob. To cancel the removal request, highlight
'CANCEL' and press the ENT Key or the small PFD Knob.
290
This manual downloaded from http://www.manualowl.com
Figure 5-144 Loading a Departure into the Active Flight Plan on the PFD
Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A