Garmin G2000 Pilot's Manual page 94

Flight instruments
FMS CDI SCALING
When FMS is the selected navigation source, the flight plan legs are sequenced automatically and
annunciations appear on the HSI for the flight phase. Flight phase annunciations are normally shown in
magenta, but when cautionary conditions exist the color changes to yellow. If the current leg in the flight plan
is a heading leg, 'HDG LEG' is annunciated in magenta beneath the aircraft symbol.
The current GPS CDI scale setting is displayed on the GTC Avionics Settings Screen and the full-scale
deflection setting may also be changed on this screen. If the selected scaling is smaller than the automatic
setting for enroute and terminal phases, the CDI is scaled accordingly and the selected setting is displayed
rather than the flight phase annunciation.
Changing the selected GPS CDI setting:
1) From the Home Screen, touch Setup > Avionics Settings.
2) Touch the System Tab.
3) Touch the GPS CDI Data Field.
4) Touch desired setting (2.00 NM, 1.00 NM, 0.30 NM, or AUTO).
When set to 'Auto' (default), the GPS CDI scale automatically adjusts to the desired limits based upon the
current phase of flight (Figure 2-26, Table 2-1).
80
This manual downloaded from http://www.manualowl.com
Figure 2-25 GPS CDI Settings
Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A