Palm Treo 700WX User Manual page 92

Using Flash Mode During an Active Call
Flash mode is an alternate way to manually manage your calls while one or more
calls are active. The preferred methods are described in "Making a Second Call" on
page 74, "Answering a Second Call (Call Waiting)" on page 75, and "Making a
Conference Call" on page 75. This mode is often used during a conference call
when one of the calls has ended but the other remains connected.
1.
Press Phone/Talk
2.
Select Send Key (Flash) to enter Flash mode.
3.
Depending on the state of your active call, pressing the Flash
softkey) does one of the following:
If you have two active calls, you can swap between them if the second
call is an incoming call.
If you have one active call, you can dial another number. You can press
Flash
If you have two calls in conference, press Flash
hang up the second call, and then dial another number.
4.
Press Power/End
Forwarding Calls
You can forward calls to another phone number. Please check with Sprint about
availability and pricing of forwarded calls; additional charges may apply.
1.
Go to your Today screen.
2.
Dial *72 followed by the number where you want to forward your calls. (For
example: *72 415-555-1234.)
76
from the Active Call screen.
(left softkey) again to set up a conference call.
to exit Flash mode and end all calls.
Section 2B: Using Your Device's Phone Features
(left
(left softkey) to