Palm Treo 700wx Read This First

1 Set up your smartphone
Ringer switch
Indicator light
(phone and charge
indicator)
Volume
Left action key
Phone/Send
Start
Center
2 Make your first phone call

Activate your phone:

a. If your smartphone screen is off, press Power/End
and then press Center on the 5-way to turn off Keyguard.
b. Turn on your phone by pressing and holding Power/End
Today screen.
Note: If you don't see your Today screen, press Phone/Send
c. If No Service appears in the upper-left corner or if you are unable to complete
a call, you may need to activate your phone. Contact your wireless provider
for assistance.
d. If the name of your wireless provider appears in the upper-left corner, you are
ready to make a call.
Today screen
Service provider
3 Set up your computer
Install software from the CD:
Install the software from the CD so that you can use ActiveSync
synchronize information on your computer with information on your smartphone.
a. Close any programs that are running on your computer.
b. Insert the Getting Started CD into your computer's CD drive.
c. Follow the onscreen instructions to install the software. When the Get
Connected screen appears, be sure to read the panel to the right.
Note: You will be required to reboot your computer during the installation process.
Getting Started CD

Remove these items from the box:

Printed material
(includes Quick Reference Guide,
Setting Up Email Guide,
USB sync cable
and Warranty)
Rechargeable battery
Palm ® Treo ™ 700wx
smartphone
Getting Started CD
AC charger
(includes Microsoft Office
Outlook 2002, ActiveSync
software, User Guide, and
additional software)
Stylus

Install the battery:

Earpiece
a. Remove the battery door.
b. Insert the battery.
c. Replace the battery door.
Screen
Right action key
Power/End
OK
5-way navigator
Microphone

Make a call:

a. From the Today screen, use the number pad on the keyboard to enter the number
to wake up the screen,
you want to call.
b. Press Phone/Send
until you see the
c. When your call is complete, press Power/End
to go to it.
Signal-strength icon
Number pad
Speed-dial button
Connect the cables:
®
software to a. Connect the sync cable to a USB port on your computer.
b. Connect the sync cable to your smartphone.
c. Connect the charger to a wall outlet and to the sync cable connector.
d. Press Power/End
Center to turn off Keyguard.
e. Follow the ActiveSync
Note: Charge your smartphone for 3.5 hours, or until the indicator light is solid green.
Palm, Inc.
950 W. Maude Ave.
Sunnyvale, CA 94085
Stereo
U.S.A.
headset
Intellectual property notices
© 2006 Palm, Inc. All rights reserved. Trademark, copyright, patent, and other intellectual property notices are
set forth on page ii within the Using Your Palm
Disclaimer and limitation of liability
Palm, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this
guide. Palm, Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may
arise through the use of this software. Palm, Inc. and its suppliers assume no responsibility for any damage
or loss caused by deletion of data as a result of malfunction, dead battery, or repairs. Be sure to make backup
copies of all important data on other media to protect against data loss.
Agency compliance information
Product regulatory and compliance information can be found in the User Guide. Install the guide from the
Getting Started CD, and then access it on your computer by double-clicking the Treo 700wx User Guide icon
on your computer desktop.
®
406-10663-00
to place the call.
to end the call.
to wake up your smartphone's screen, and then press
® software setup instructions on your computer screen.
Indicator light
® Treo 700wx user guide installed on the user's computer.

Complete the setup wizard:

®
a. When the Windows Mobile screen appears, remove the stylus and tap
the screen.
b. Follow the onscreen instructions.
c. Tap Begin Quick Tour for an overview of your smartphone's features.
Note: If your smartphone turns itself off, press Power/End
the screen, and then press Center on the 5-way navigator to turn
off Keyguard.

Set up your voicemail

a. Press Phone/Send to go to your Today screen.
b. To access your wireless provider's voicemail system, do one of the following:
• Tap the Voicemail speed-dial button with your stylus.
• If a Voicemail speed-dial button is not configured, dial the phone number
for your wireless provider's voicemail system.
c. Follow the voice prompts to set up your voicemail.
What's my phone number?
To view your phone number, press Menu
from the Today screen, and then select Preferences > Phone Settings.
Look here for your
phone number
Where is my manual?
In the box On your smartphone
Quick Reference Guide, Setting Up
Help, Quick Tour
Email Guide
Many of the built-in applications include
Start with the Quick Reference Guide for
on-device Help. To access Help, go to the
an introduction to the basics.
application or screen you want help with,
press Start
The Email Guide contains instructions to
quickly set up your email account. The Quick Tour highlights many of your
smart device's features. Press Start, select
Programs, and then select Quick Tour
On your computer On the web
www.palm.com/support
User Guide
Hundreds of pages of illustrated info,
steps, and tips.
Windows: Start>Programs>Palm
Note: For info on your network and service plan, contact your wireless service provider.

Read This First

to wake up
(right action key)
, and select Help.
.
700wx