Palm Treo 700WX User Manual page 308

Using System Password Lock
To protect your personal information, you can lock the system so that you need to
enter your password to access any of your information or use other features of
your smart device.
Important:
1.
Press Start
2.
On the Personal tab, select Lock
3.
On the Password tab, check the Prompt if device
unused for box to turn on the password feature.
4.
Select the first list, and then select how long a
period of inactivity must pass before you are
prompted to enter a password to unlock the
system.
5.
Select the Password type list, and then select a
format for your password.
292
If you lock your system, you must enter the exact password to unlock it. If
you enter an incorrect password, you are given another chance. Each
time an incorrect password is entered, you are given progressively longer
time periods between your chances to enter the password. If you forget
the password, you need to perform a hard reset to resume using your
smart device. Performing a hard reset deletes all the entries in your smart
device. However, you can restore all previously synchronized information
the next time you sync (see "Synchronizing Information—The Basics" on
page 27). In addition, your device might not re-establish a Sprint PCS
Vision session after a hard reset. To manually establish a new Sprint PCS
Vision session, open the browser to access a Web site.
and select Settings.
.
Section 6B: Customizing Your Smart Device