Palm Treo 700WX User Manual page 178

7.
Enter an alphanumeric passkey between 1 and 16 characters long, and then
press Next
8.
If the passkey is not built-in, enter the same
passkey on the smart device and the other
Bluetooth device, and then press Finish
(right softkey).
9.
If you're connecting to a headset or hands-free
car kit, check the Hands Free box, and then press
Finish
Important:
10.
If you're connecting to a GPS device, press Finish
the COM Ports tab, select the GPS device you selected in step 6, and then
select New Outgoing Port. (Press Finish
partnership and COM port, you can configure the GPS settings (see "Setting
Up a GPS Device" on page 298). Be sure to select the same port you have
assigned for GPS here.)
11.
Press OK
You can now communicate with this device whenever it is within range (about
30 feet) and your smart device's Bluetooth feature is turned on (see steps 2 and 3
earlier in this section).
162
(right softkey).
(right softkey).
Some Bluetooth devices have a built-in passkey; others let you choose the
passkey. See the documentation for the Bluetooth device for more
information.
.
(right softkey), select
(right softkey). After you set the
Section 3E: Bluetooth/IR