Palm Treo 700WX User Manual page 37

Press Phone/Talk
Follow the voice prompts to activate your phone. (A service provisioning
message appears.)
Wait a few minutes until you see the Programming Successful!
message, and then press Dismiss
5.
Use the number pad on the keyboard to enter
the number you want to call.
6.
Press Phone/Talk
7.
When your call is complete, press Power/End
to end the call.
Adjusting Call Volume
While a call is in progress, press the Volume button on the side of your smart
device to adjust call volume.
Section 1B: Setting Up Service
to dial.
to dial.
(left softkey).
21