3.
Insert the battery into the compartment at a 45-degree angle, and then
press it into place.
4.
Slide the battery door onto the back of the smart device until it clicks into
place. Your smart device screen turns on and the Treo screen appears.
Wait for the progress bar on the Treo screen to fill and the Windows Mobile
screen to appear.
5.
Follow the onscreen instructions to finish the installation.
Note:
Tip:
12
If your smart device does not turn on after you insert the battery, you
need to charge it by connecting it to the AC charger. If it still doesn't start,
do a soft reset. See "Resetting Your Smart Device" on page 320
Buy an extra battery as a spare for long trips or heavy data use. Visit
www.palm.com to purchase batteries that are approved by Sprint and
that are compatible with your device.
Section 1A: Device Setup
®