Palm Treo 700WX User Manual page 315

3.
On the Programs tab, select the GPS program port list, and then select the
port for applications to use to access GPS information. (This port must also
be selected in your GPS application's configuration settings.)
4.
Select the Hardware tab.
5.
Select the GPS hardware port list, and then select the port to which your GPS
receiver is connected. (This must be a different port from the one you set in
step 3 as your program port. To connect to the GPS device using a Bluetooth
connection, you must first set up a partnership between the two devices.
See "Setting Up a Bluetooth Connection" on page 161.)
6.
Select the Access tab and check the Manage GPS automatically box. This
setting lets more than one application simultaneously access your GPS
information.
7.
Press OK
Viewing Memory Usage
1.
Press Start
2.
Select the System tab, and then select Memory
3.
Select any of the following tabs:
Main: Displays the amount of memory assigned to your applications
and information, as well as the amount of memory in use versus the
available memory.
Storage Card: Displays the amount of memory available on an expansion
card that is inserted into the expansion slot on your smart device.
Section 6B: Customizing Your Smart Device
to finish.
and select Settings.
.
299