Agilent Technologies 85110L User's And Service Manual page 6

General Safety Considerations
WARNING This is a Safety Class I product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only
be inserted in a socket outlet provided with a protective earth
contact. Any interruption of the protective conductor, inside or
outside of the instrument, will make the instrument dangerous.
Intentional interruption is prohibited.
WARNING If this product is not used as specified, the protection provided by
the equipment could be impaired. This product must be used in a
normal condition (in which all means for protection are intact) only.
No operator serviceable parts inside. Refer servicing to qualified
WARNING
personnel. To prevent electrical shock, do not remove covers.
VENTILATION REQUIREMENTS: When installing the product in a cabinet,
CAUTION
the convection into and out of the product must not be restricted. The ambient
temperature (outside the cabinet) must be less than the maximum operating
temperature of the product by 4°C for every 100 watts dissipated in the
cabinet. If the total power dissipated in the cabinet is greater than 800 watts,
then forced convection must be used.
The front panel LINE switch disconnects the mains circuits from the mains
CAUTION
supply after the EMC filters and before other parts of the instrument.
CAUTION This product is designed for use in Installation Category II and Pollution
Degree 2 per IEC 1010 and 664 respectively.
v