Agilent Technologies 85110L User's And Service Manual page 34

Figure 3-3 RF and IF Switching with Two Test Sets
NOTE
1. Not all system connections are shown.
2. In dual source configurations, the second source may be multiplexed in a
similar manner. If only one dual source test set is used, the second source
may be connected directly to the appropriate test set.
Table 3-1 33311C Coaxial Switch Positions with Two Test Sets
New ADDRESS Test Set
of Test Set Selected
20
21
Agilent 85110L Test Set
33311C Coaxial Switch
Port Selected
1 Port 1
2 Port 2
Operation
Controlling Multiple Test Sets
3-7