Agilent Technologies 85110L User's And Service Manual page 26

Installation
Introduction
Figure 2-3 85110L Bench Configuration and System Connections
Packaging
If it is necessary to ship the test set, each test set should be repackaged in the original
factory package. Containers and materials identical to those used by the factory are
available through Agilent offices.
Comparable packaging materials may also be used. Wrap the test set in heavy paper or
anti-static plastic. If shipping to an Agilent office or service center, complete and attach a
service tag (from the 8510C manual set). Use sufficient shock absorbing material on all
sides of the test set to provide a thick, firm cushion and prevent movement. Seal the
shipping container securely and mark it "FRAGILE".
In any correspondence with Agilent, refer to the test set by full model and serial number
(refer to "Contacting Agilent" on page iv).
Agilent 85110L Test Set 2-5