Switching The Display Contents Of The Measurement Results - Konica Minolta CM-2600d Instruction Manual

Displaying the Measurement Results

Switching the Display Contents of the Measurement Results

In the measurement screen that appears at the end of measurement, the following data will be displayed
according to the settings made in the <FILE> screen. The display contents can also be changed.
M
emo
Selecting "DISP" by turning B in a measurement screen in which "DISP" is displayed and then pressing A
will allow you to switch the display contents of the measurement results.
Display Mode (P. E-38)
DIFF&ABS
(Color difference &
absolute value)
PASS/FAIL
COLOR GRAPH
(Color difference graph)
SPECT. GRAPH
(Spectral graph)
ASSESSMENT
N
ote
• Metamerism index is displayed only if L*a*b* or L*C*h is selected as the color space.
• "Deviation A" indicates that the direction in relation to the target color is displayed, irrespective of whether the
results are PASS or FAIL. "Deviation B" indicates that "PASS" is displayed when the result is PASS and the
direction is displayed only when the result is FAIL.
• Items enclosed by
• If the display mode is set to "COLOR GRAPH" and the MASK/GLOSS is set to "*/I+E", the system will display
graphs for light source #1 only. If you set the system to use two different sources, only graphs for source #1 will
be shown.
E-70
Settings in <FILE> Screen
Color Space (P. E-39)
L*a*b*, L*C*h,
XYZ, Yxy etc.
WI, YI etc.
Munsell, density
L*a*b*, L*C*h,
XYZ, Yxy etc.
WI, YI etc.
Munsell, density
L*a*b* only
L*a*b*, L*C*h only
are not displayed in English.
Specular component (P. E-35)
I + E
SCI or SCE
I + E
SCI or SCE
I + E
SCI or SCE
I + E
SCI or SCE
I + E
SCI or SCE
I + E
SCI or SCE
Other Conditions
Only illuminant 1 is set.
Both illuminants 1 and 2
are set.
Only illuminant 1 is set.
Both illuminants 1 and 2
are set.
Japanese only
Box tolerance
Elliptical tolerance