Dr Detector Battery Level Display - Konica Minolta AeroDR SYSTEM Operation Manual

3.3 Charging of DR Detector
3 .3 .5 DR Detector battery level
display
The DR Detector LED changes according to the bat-
tery level.
 AeroDR 1417HQ, AeroDR 1417S,
AeroDR 1717HQ, AeroDR 1012HQ,
AeroDR 2 1417HQ, AeroDR 2 1417S
Battery level
Less than 3 % (exposure
not possible)
Less than 5 %
Less than 10 %
10 % or more
IMPORTANT •••••••••••••••••••••••••••••••••••••
• When the battery runs down completely, all the LEDs
go out. Confirm that the LED (green) either lights or
flashes when you perform exposure.
• • • •• • • •• • • ••••••••••••••••••••••••••••••••••••••••••
 AeroDR 3 1417HD, AeroDR 3 1717HD,
AeroDR 3 1012HQ
Battery level
2 % or less
3 % to 9 %
10 % to 66 %
67 % to 79 %
80 % or more
IMPORTANT •••••••••••••••••••••••••••••••••••••
• When the battery runs down completely, all the LEDs
go out. Confirm that the LED (blue) either lights or
flashes when you perform exposure.
• • • •• • • •• • • ••••••••••••••••••••••••••••••••••••••••••
LED display
Lit (blue)
Fast flashing (blue)
Slow flashing (blue)
Off
LED display
Slow flashing (orange)
Slow flashing (blue)
Lit and Slow flashing (blue)
Lit and Slow flashing (blue)
Lit (blue)
HINT •••••••••••••••••••••••••••••••••• • ••
• Confirm the level of battery power of the AeroDR 3
1417HD, AeroDR 3 1717HD and AeroDR 3 1012HQ
with the Battery LED. Press the Selection SW which
makes the Battery LED light for 3 seconds even when
it is turned off.
•••••••••••••••••••••••••••••••••••••••••••••••••• • ••
82