Table of Contents
Advertisement
October 2007
The following diagram shows LinkPlexer 6.0, co-resident with Communication
Control Toolkit.
Features
This section describes the main features of LinkPlexer 6.0.
DN association sharing
Both CompuCALL and Intelligent Call Management (ICM) limit the association
of resources to a single session. Two host applications with simultaneous
CompuCALL/ICM application sessions established with a given switch cannot
have the same resource associated with the two sessions at the same time.
LinkPlexer 6.0 overcomes this limitation by propagating all resource messages
from the CS 2x00/DMS to all clients.
For example, a dv-call-offered message from the CS 2x00/DMS is propagated to
all applications and not just the client that originally issued the dv-dn-
association request.
Installation and Configuration Guide
Getting started
15
Advertisement
Table of Contents
