Nortel LinkPlexer Installation And Configuration Manual page 175

October 2007
Description
Software version control
Software license control
Supportability options
Configuration
CS 2000/CS 2100/DMS/MSL-100
Installation and Configuration Guide
Comparison of LinkPlexer across releases
Functional comparison between
LinkPlexer 1.1, LinkPlexer 1.2, and
LinkPlexer 6.0
Feature introduced in LinkPlexer 1.1 and
remains unchanged in LinkPlexer 1.2 and
LinkPlexer 6.0.
Feature introduced in LinkPlexer 1.1 and
remains unchanged in LinkPlexer 1.2 and
LinkPlexer 6.0.
The individual DMSerrorX.log files of
LinkPlexer 1.1 are amalgamated into a single
file (LP_Curr.log) in LinkPlexer 1.2 and
LinkPlexer 6.0. This is discussed in "Log
files" on page 126. The individual
DMSsendX.log and DMSrecvX.log files of
LinkPlexer 1.1 are amalgamated into
LP_SndRcvCurr.log in LinkPlexer 1.2 and
LinkPlexer 6.0. This is discussed in "Log
files" on page 126. In LinkPlexer 1.2 and
LinkPlexer 6.0, log file sizes are configurable
(in the configuration file) and dynamic, as
discussed in "LinkPlexer 6.0 configuration"
on page 88.
The configuration files DMSLocal.ini and
DMSGlobal.ini of LinkPlexer 1.1 are
replaced by LPConfig.ini in LinkPlexer 1.2
and LinkPlexer 6.0. Refer to Chapter 7,
"Configuring and maintaining LinkPlexer
6.0."
All releases can connect to the ICM or
CompuCALL interface of CS 2000/CS 2100/
DMS/MSL-100.
175