Table of Contents
Advertisement
October 2007
LinkPlexer Keycode Tracker
ATTENTION
Use the LinkPlexer Keycode Tracker to enter the dongle keycodes. The
Keycode Tracker displays the number of applications that can connect to the
LinkPlexer 6.0 server.
You can also use the Keycode tracker to confirm dongle detection. Click the
Check Dongle button and wait approximately 10 seconds. If a dongle is
detected, the Check Dongle box on the Keycode Tracker window displays
Connected. If the dongle is not detected, the Check Dongle box displays Not
Connected. If this occurs, see Appendix A, "Troubleshooting."
Alternatively, the dongle can be also be detected using iButton applications as
referred to at http://www.ibutton.com/software.
Installation and Configuration Guide
This section is applicable only if you are using the iButton for
software control and licensing.
Installing LinkPlexer 6.0
71
Advertisement
Table of Contents
