5
6
Replacing the internal Compact Flash
Use the instructions in this section if you must replace the internal Compact
Flash. This internal device is not hot-swappable.
Average time to replace the internal Compact Flash: 1 minute
Copyright © 2007, Nortel Networks
.
Firmly grasp the DIMM by its edges and pull straight up to remove
the DIMM from the slot.
Insert the replacement DIMM in the slot, pushing down firmly but
gently to fully seat the DIMM in the slot.
The release latches close when the DIMM is properly installed.
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301 01.02 Standard
10.0 7 August 2007
Replacing the internal Compact Flash 65
—End—