Nortel Secure 4134 Installation Manual page 8

DANGER
Danger—High Voltage notices provide information about how to avoid a situation or
condition that can cause serious personal injury or death from high voltage or electric
shock.
DANGER
Danger notices provide information about how to avoid a situation or condition that can
cause serious personal injury or death.
Cautions and warnings for the Secure Router 4134
The following precautionary messages apply to the Secure Router 4134. For your safety, read these precautions
carefully before proceeding with installation of the product.
WARNING
Only qualified service personnel must perform the installation. Read and follow
all warning notices and instructions marked on the product or included in the
documentation. For translations of this statement, see
(page 95).
WARNING
This product relies on the building installation for overcurrent protection. Ensure that a
fuse or circuit breaker no larger than 120 V AC, 15 A U.S. (240 V AC, 10 A international)
is used on the phase conductors. For translations of this statement, see
of safety messages" (page
CAUTION
To reduce the risk of fire, use only number 26 AWG or larger UL Listed or CSA Certified
Telecommunication Line Cord for all network connections.
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
Hardware Notice
The Lithium battery in this product is part of a non-volatile memory device and will retain data for 10 years in the
absence of power. Nortel does not consider the lithium battery in this unit a field replaceable or serviceable part and
should not be accessed by the customer.
DANGER
Risk of injury by electric shock
Before working on this equipment, be aware of good safety practices and the hazards
involved with electrical circuits. Use only power cords that have a grounding path.
Ensure the switch is properly grounded before powering on the unit.
95).
"Translations of safety messages"
"Translations