Connecting Dc Power - Nortel Secure 4134 Installation Manual

52 Installing Secure Router 4134 hardware components
Step
1
2

Connecting DC power

Average time to install one DC power cable: 3 minutes.
Copyright © 2007, Nortel Networks
.
Action
Insert the female end of an appropriately rated AC power cord in
the AC receptacle on the rear panel of the Secure Router 4134,
as shown in the following figure.
Insert the male end of the power cord in a standard 110/220 V AC
power outlet.
CAUTION
Ensure you use an appropriately rated AC power cord
only. Do not use an extension cord.
CAUTION
ESD
Always wear an ESD-preventative wrist strap when connecting
cables or performing maintenance on a Secure Router 4134.
Ensure that the wrist strap makes contact with your skin.
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301 01.02 Standard
10.0 7 August 2007
—End—