Fe And Fe/Poe Medium Module - Nortel Secure 4134 Installation Manual

Installation hardware components
Hide thumbs Also See for Secure 4134:
Table of Contents

Advertisement

Port
Table 19
Module LEDs
LED
STAT
10/100/1000
BASE-T PORT
STATUS
SFP PORT
STATUS

FE and FE/PoE Medium Module

The 24-port Fast Ethernet and Fast Ethernet/Power-Over-Ethernet Medium
Modules each provide 24 Ethernet ports that support 10 Mbps and 100
Mbps operation over unshielded twisted pair (UTP) wiring. The module is
non-blocking. The 24-port FE and FE/PoE Medium Modules provide both
Layer 2 switching and Layer 3 routing functionality.
Copyright © 2007, Nortel Networks
.
Connector
Recommended
cable type
1000BASE-LX
62.5µm or
62.5µm fiber
cable (two fibers)
1000BASE-LX
10µm fiber cable
(two fibers)
1000BASE-SX
62.5µm fiber
cable (two fibers)
1000BASE-SX
50µm fiber cable
(two fibers)
Description
General module status:
Off: No power available to the module
Yellow: Out of service, or failed to initiate.
Green: Power on and the module is operational.
LEDs are integrated into each port.
Status of each interface:
Off: Link not connected or Link Fail
Solid Green: Link established at 10 or 100 Mbps
Solid Orange: Link established at 1000 Mbps
Blinking Green/Orange: Receiving/transmitting traffic
LEDs are integrated into each port.
Status of each interface:
Off: Link not connected or Link Fail
Solid Orange: Link established at 1000 Mbps
Blinking Orange: Receive/transmit traffic
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301 01.02 Standard
10.0 7 August 2007
Interface modules for the Secure Router 4134 35
Minimum
cable length
Maximum
cable length
550 m = 1800 ft
5000 m = 16400
ft
220 m = 722 ft
500 m = 1640 ft

Advertisement

Table of Contents
loading

Table of Contents