Figure 4 Mounting The Instant Internet 100-S Unit To The Wall - Nortel BayStack Instant Internet 100-S User Manual

Note: The mounting bracket is designed so that it will work on either
side of the Instant Internet unit. Only three of the six holes in the
mounting bracket are used on each side of the unit.
3
Position your unit on the wall vertically as shown in
The front panel of your unit should be facing the ceiling. The bottom of your
unit should be against the wall.

Figure 4 Mounting the Instant Internet 100-S unit to the wall

4
Attach your unit to the wall using the mounting screws and washers provided.
Chapter 3 Instant Internet 100-S hardware installation
Setting Up the BayStack Instant Internet 100-S Unit
Figure 4.
9864FB
45