Figure 13 Hyperterminal Com1 Properties Dialog Box - Nortel BayStack Instant Internet 100-S User Manual

68 Chapter 7 Out-of-band management support
5
From the Connect using list, select COM1, and then click OK.
The COM1 Properties dialog box opens

Figure 13 HyperTerminal COM1 Properties dialog box

6
From the Bits per second list, select 115200 to set the modem speed, and then
click OK.
HyperTerminal establishes a connection to the modem and the cursor is
positioned in the main HyperTerminal dialog box.
7
Enter:
ats0=1&w\r
This command instructs the modem to answer on the first ring and saves
the settings to the modem. Some modems respond with "OK" or a similar
message when the settings are saved to the modem.
8 Disconnect the modem from the PC.
209374-A
(Figure 13).