Adapter Cable Pinout Diagrams; Remote Access Adapter Cables; Null Modem Adapter (Pc-To-Pc) Cable - Nortel BayStack Instant Internet 100-S User Manual

Nortel baystack 100-s: user guide

Hide thumbs Also See for BayStack Instant Internet 100-S:

Table of Contents

Appendix B

Adapter cable pinout diagrams

This appendix describes the pinout settings for the modem and null modem

adapter cables.

If you want to connect a PC or dial-up modem directly to your Instant Internet

100-S unit to configure the unit using remote access commands (out-of-band

management), you must provide the connection cable. These are standard cables.

You can have a cable made according to the pinout diagrams in this appendix or

you can purchase the cable from any computer supply store.

For information on configuring your unit remotely, refer to Reference for the

BayStack Instant Internet Remote Access Commands Version 7.11.

Figure 14

to as a pc-to-pc file transfer cable). This serial cable must have two DB-9 female

connectors.

Use a null modem cable to connect a PC to the Instant Internet unit's AUX port

for out-of-band management.

shows the pinout settings for a null modem adapter cable (also referred

Setting Up the BayStack Instant Internet 100-S Unit

Table of Contents