Command Prompts - Nortel 2360 Configuration Manual

44 Using the command-line interface

Command prompts

By default, the WSS Software CLI provides the following prompt for restricted users. The mmmm portion shows the
WSS model number (for example, 2360) and the nnnnnn portion shows the last 6 digits of the switch's media access
control (MAC) address.
WSS-mmmm-nnnnnn>
After you become enabled as an administrative user by typing enable and supplying a suitable password, WSS Software
displays the following prompt:
WSS-mmmm-nnnnnn#
For ease of presentation, this manual shows the restricted and enabled prompts as follows:
WSS>
WSS#
For information about changing the CLI prompt on a WSS, see the set prompt command description in the
WLAN Security Switch 2300 Series Command Line
NN47250-500 (320657-F Version 02.01)
Reference.
Nortel