Displaying Rf Attributes - Nortel 2360 Configuration Manual

WSS# show auto-tune neighbors ap 2 radio 1
Total number of entries for port 2 radio 1: 5
Channel Neighbor BSS/MAC
------- ----------------- ----------
1 00:0b:85:06:e3:60
1 00:0b:0e:00:0a:80
1 00:0b:0e:00:d2:c0
1 00:0b:85:06:dd:00
1 00:0b:0e:00:05:c1

Displaying RF attributes

To display the current values of the RF attributes Auto-RF uses to decide whether to change channel or power settings,
use the following commands:
show auto-tune attributes [ap ap-num [radio {1 | 2| all}]]
show auto-tune attributes [ap ap-num [radio {1 | 2| all}]]
To display RF attribute information for radio 1 on the directly connected AP on port 2, type the following command:
WSS# show auto-tune attributes ap 2 radio 1
Auto-tune attributes for :
Noise:
Utilization:
CRC Errors count:
RSSI
------
-46
-78
-74
-50
-72
-92 Packet Retransmission Count:
0 Phy Errors Count:
122
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Configuring Auto-RF 329
0
0