Setting The System Location And Contact Strings - Nortel 2360 Configuration Manual

152 Configuring SNMP

Setting the system location and contact strings

To set the location and contact strings for a switch, use the following commands:
set system location string
set system contact string
Each string can be up to 256 characters long and blank spaces are accepted.
The following commands set a WSS's location to 3rd_floor_closet and set the contact to sysadmin1:
WSS# set system location 3rd_floor_closet
success: change accepted.
WSS# set system contact sysadmin1
success: change accepted.
NN47250-500 (320657-F Version 02.01)