Configuring Encryption For Mac Clients - Nortel 2360 Configuration Manual

Configuring encryption for MAC clients

The following example shows how to configure WSS Software to provide PSK authentication and TKIP or 40-bit WEP
encryption for MAC clients:
1
Create an authentication rule that sends all MAC users of SSID voice to the local database for
authentication and authorization. Type the following command:
WSS# set authentication mac ssid voice * local
success: configuration saved.
2
Configure a MAC user group named wpa-for-mac that assigns all MAC users in the group to VLAN blue.
Type the following command:
WSS# set mac-usergroup wpa-for-mac attr vlan-name blue
success: configuration saved.
3
Add MAC users to MAC user group wpa-for-mac. Type the following commands:
WSS# set mac-user aa:bb:cc:dd:ee:ff group wpa-for-mac
success: configuration saved.
WSS# set mac-user a1:b1:c1:d1:e1:f1 group wpa-for-mac
success: configuration saved.
4
Verify the AAA configuration changes. Type the following command:
WSS# show aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server
State
---------------------------------------------------------------
----
Server groups
Web Portal:
enabled
set authentication mac ssid voice * local
mac-usergroup wpa-for-mac
vlan-name = blue
mac-user aa:bb:cc:dd:ee:ff
Group = wpa-for-mac
mac-user a1:b1:c1:d1:e1:f1
Group = wpa-for-mac
Addr
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Configuring user encryption 317
Ports T/o Tries Dead