Clearing Network Domain Configuration From A Wss - Nortel 2360 Configuration Manual

188 Configuring network domains

Clearing network domain configuration from a WSS

You can clear all Network Domain configuration from a WSS, regardless of whether the WSS is a seed or a member of
a Network Domain. You may want to do this in order to change a WSS from one Network Domain to another, or to
remove a WSS entirely from a Network Domain.
To clear the Network Domain configuration from the WSS, type the following command:
clear network-domain
This command has no effect if the WSS is not configured as part of a Network Domain.
NN47250-500 (320657-F Version 02.01)